U-PROX Extender

Radio repeater (radio channel extension)

U-PROX Extender
Secure two-way radio communication (256 bit)
U-PROX Extender
Over-the-Air (OTA) Automatic Update
U-PROX Extender
Up to 36 hours of battery life
U-PROX Extender
Radio channel blocking detection
U-PROX Extender
Range increase by 2 times (up to 9600 m)
U-PROX Extender

The fastest way to control

Gallery

Photos and videos

Certificates

NEW PRODUCTS

Flexible system management, instant notifications and key features help take your safety and comfort to the next level

Want to buy?

Contact partner companies to purchase or install security and automation devices.

Want to sell?

Become an official distributor, reseller or installer of U-PROX security and safety systems.

Features

Retransmission automatic, selection of the optimal route
Repeaters in the system 8
Retransmission levels 1
Power 12V (VDC)
Battery backup 2500 mAh battery, up to 36 hours
Radio frequency ISM wireless interface with multiple channels:
ITU region 1: 868.0...868.6 MHz (EU, UA), 869.0...869.4 (MA), 100 kHz bandwidth, 20 mW max, distance - up to 4800m (in open space);
ITU region 3 (AU): 916.5...917 MHz, 100 kHz bandwidth, 20 mW max, distance to devices - up to 4800 m (in open space).
Communication Two-way, encrypted, with sabotage (jamming) detection.
The encryption key is 256 bits
Operating temperature range -10°C ... +55°C
Permissible humidity up to 75%
Environmental class II (according to EN 50131-1)
Security grade 2
Dimensions 167 х 120 х 25.4 mm
Case colour white, black
Weight 0.26 kg
Complete set 1. U-Prox Extender;
2. 18650 battery (pre-installed);
3. Power supply unit;
4. Short user manual
Color
U-PROX Extender - White
U-PROX Extender - White
U-PROX Extender - White
U-PROX Extender - White
U-PROX Extender - White
U-PROX Extender - White
U-PROX Extender - White
+1
U-PROX Extender - Black
U-PROX Extender - Black
U-PROX Extender - Black
U-PROX Extender - Black
U-PROX Extender - Black
U-PROX Extender - Black

U-PROX Extender User manual

Introduction

This manual describes how to install and configure the U‑PROX Extender wireless radio range extenders. Before using the device, you should carefully study this manual.

Technical support for all U‑PROX products is provided by phone: +38(091)481‑01‑69 and/or by e‑mail:
support@u‑prox.systems.

Security Warnings

When installing and operating the device, it is necessary to comply with the “Rules for the technical operation of electrical devices by consumers” and the “Safety rules for the operation of electrical devices.” The appliance must be mounted with the power supply turned off. Fire safety rules must also be observed when performing work.

WARNING. DO NOT DISASSEMBLE THE DEVICE OR ITS POWER SUPPLY WHILE IT IS ENERGIZED OR USE THE POWER SUPPLY WITH A DAMAGED CABLE. WARNING. THE DEVICE HAS A BUILT‑IN BATTERY. SUBSTITUTING AN INCORRECT TYPE OF BATTERY FOR THE DEVICE MAY RESULT IN FIRE OR EXPLOSION. DISPOSE OF USED BATTERIES IN ACCORDANCE WITH LOCAL LAWS AND REGULATIONS.

Applications for Customization

U‑Prox Installer Mobile Application

This application is designed for setting up the U‑PROX wireless security system. It is intended for both individual users and engineers of central monitoring stations. Using a mobile phone, the application allows you to perform full security system setup – including installation, testing, and calibration of wireless system elements; configuring security groups; connecting to monitoring stations; adding users; and granting them the right to control the security system from the U‑PROX Home app.

Installer Web Portal

The U‑PROX Installer WEB portal is designed to configure the U‑PROX wireless security system. It is intended for both individual users and engineers of central monitoring stations of security organizations. Using a web browser, you can perform complete security system setup – install, test, and calibrate wireless system elements; configure security groups; connect to monitoring stations; add users; and grant them the right to control the security system from the U‑PROX Home app.

https://web-security.u‑prox.systems/

Description and Principle of Operation

U‑PROX Extender is a radio range extender that significantly increases the radio communication range between the U‑PROX security center and other security system devices. It supports the connection of wireless devices (detectors, keypads, key fobs, etc.) via a radio channel at a distance of up to 4800 m.

The device communicates with the U‑PROX security center via a radio channel at distances of up to 4800 m.

U‑PROX Extender is equipped with two transceivers operating at 868.0…868.6 MHz, with several redundant channels. It provides secure, encrypted (256‑bit encryption key) two‑way radio communication with detection of radio channel sabotage.

The radio range extender automatically detects which devices need to be relayed. Thanks to intelligent algorithms, the extenders and the security center automatically coordinate the most optimal data transmission route.

The device supports the relaying of images from motion detectors that have a built‑in U‑PROX PIR Cam.

The radio repeater has a built‑in 2500 mAh battery and can operate for up to 36 hours in the absence of main power.

It is installed indoors.

The device works only with the U‑PROX security system; it cannot be connected to third‑party systems.

Functional Elements of the Device

  1. Device body
  2. Light indication
  3. Mounting plate
  4. Tamper switch
  5. On/off button
  6. Connector for connecting the power supply
  7. Cable clamps

The battery cannot be charged at temperatures below 10°C, make sure the power adapter is connected.

Power Supply

The device is powered by a 12V power supply and features a standard 5.5×2.5mm DC plug socket, which allows you to use other power supplies or connect an external uninterruptible power supply or battery.

In the absence of main power, the device enters power saving mode when operating from the built‑in battery. In this mode, the constant status display is disabled; instead, the status is updated every 30 seconds.

Display in the Current Mode

The U‑PROX indicator light on the front panel shows the current status of the device:

Lights up green – there is a connection with the security center.
Lights up red – no communication with the security center.

Indication During Operation Without Main Power Supply

Blinks green every 30 seconds – no main power; device in power saving mode; communication maintained.
Blinks red every 30 seconds – no main power; device in power saving mode; no communication detected.

Installation

Selecting the Installation Location

Carefully choose the location of the radio range extender. It must meet the following criteria:

    1. Reliable communication with U‑PROX wireless devices.
    2. Reliable communication with the security center.
    3. The device should be placed out of sight.

The device must not be placed:

    1. Outdoors or in rooms with unacceptable humidity and temperature.
    2. In areas with high levels of radio interference.
    3. Near objects that can cause radio signal attenuation (metal, mirrors, etc.).

Mounting

  1. Slide the mounting plate (3) down and disconnect it.

    2. Connect the power supply to the device connector (6).

    3. Secure the cables with the clamps (7).

4. Mount the plate (3) to the surface (e.g., wall) using the provided screws and dowels.

    1. Ensure that the power supply is connected and secured with the clamps (7).
    2. Place the device on the mounting plate (3) and slide it down to engage and lock the tamper contact (4).

    3. Secure the housing with the supplied screw.

Turning On and Off

To turn on the appliance, simply connect the power supply to the device and plug it into a power outlet.

To turn on the appliance without the main power supply connected, press the button (5). The indicator light (2) will turn on and the device will start booting up.

To turn off the appliance, disconnect the power supply, then press and hold the button (5) for 5 seconds until the sound and light indications go out.

Settings

  1. Download and install the U‑PROX Installer mobile application to configure the system.
  2. Launch the U‑PROX Installer application and log in, or log in via the U‑PROX Installer WEB portal.

If necessary, register as a standalone installer or obtain access as a security company installer.

Adding a Device to the Security System (Registration)

Launch the U‑PROX Installer application or open the WEB portal in a browser and log in.

Select the U‑PROX MPX to which you want to add a radio range extender from the list of devices.

Press the (🞧) button (“Add radio device”). The security center will enter registration mode for detectors, keypads, etc. In this window, click on the device icons to view the activation instructions.

According to the instructions, turn on the radio range extender and bring it to the security center at a distance of about 1 meter.

Wait 15–20 seconds – the wireless device will be registered.

The application will open the radio range extender settings. Configure your device.

Basic Settings of the Radio Repeater

Select the device you want to configure from the device list.

“Name” – the name of the device.

“Light indication” – turns the device’s light indication on or off.

Special settings:

  1. “Disable tamper” – when enabled, the device will not respond to the opening of the case.
  2. “Disable alarm when communication is lost” – do not generate an alarm if communication with the device is lost.

Testing the Connection

Warning: Before performing this step, the device MUST be registered in the U‑PROX security system.

Launch the U‑PROX Installer application or log in via the U‑PROX Installer WEB portal.

Select a security center from the list.

Select a device from the list.

Start the test mode and choose either the Normal signal test or the Grade II signal test.

Attention: Testing is performed at an average power level for conventional signal testing, and at reduced power (in accordance with EN 50131‑1) for Grade II signal testing.

To start testing the device’s signal strength, wait for the next communication session with the device or break its tamper.

Move the device to the pre‑selected installation location.

Using the data in the U‑PROX Installer mobile application or WEB portal, select a location with an optimal signal strength of at least –95 dBm. You may also use the device’s light indication.

  • LED flashes green (up to –87 dBm) – excellent signal strength, installation is possible.
  • LED flashes yellow (up to –88…–94 dBm) – average signal strength, installation is possible.
  • LED flashes red (up to –95…–111 dBm) – poor signal strength; move the device to another location.

To exit the signal test mode, click the “End Test” button in the application.

Attention: The test will automatically complete 30 minutes after starting.

Remove a Device

Launch the U‑PROX Installer application or log in via the U‑PROX Installer WEB portal.

Select a security center from the list.

Select the device from the list, click the “Uninstall” button, and confirm its removal.

Wireless Device States

Viewing Radio Broadcast Routes

Launch the U‑PROX Installer application or log in via the U‑PROX Installer WEB portal. Select a security center from the list. Go to the “Retransmission” section.

The screen displays the repeater’s structure. The radio range extender automatically determines which devices require relaying. Intelligent algorithms ensure that the extenders and the security center agree on the most optimal data transmission route.

Service

The device normally requires minimal maintenance. Use a dry, appliance‑suitable cloth to periodically clean the device’s case from dust and contaminants.

Compliance with Standards

  • RED (Radio Equipment Directive) Directive 2014/53/EU
  • EU ROHS Directive 2011/65/EU, EN IEC 63000:2018
  • EN 62311:2008
  • EN 62368‑1:2014
  • EN 50130‑4:2011/A1:2014
  • EN 61000‑6‑3:2007/A1:2011
  • ETSI EN 301 489‑1 v2.2.3
  • ETSI EN 301 489‑3 v2.1.1
  • ETSI EN 300 220‑1 v3.1.1
  • ETSI EN 300 220‑2 v3.2.1
  • EN 50131‑1 Grade 2, Class II:
    1. EN 50131‑1:2006/A1:2009/A2:2017/A3:2020
    2. EN 50131‑3:2009
    3. EN 50131‑5‑3:2017
    4. EN 50131‑6:2

Warranty Obligations

The warranty period for the U‑PROX device (excluding batteries) is 2 years from the date of sale. If the device is not functioning properly, please contact
support@u‑prox.systems; many issues may be resolved remotely.

The Scope of Delivery

  1. U‑PROX Extender
  2. 18650 battery (pre‑installed)
  3. Power supply
  4. Quick start guide

© 2024 Limited Liability Company Integrated Technical Vision
www.u‑prox.systems

 

13 August 2024
U-PROX security system now with a camera
U-PROX security system now with a camera

Meet the new product that is already available for order - the U-PROX PIR Cam wireless motion detector.

If the detector is triggered, it will send one or a series of photos to assess the situation to the U-PROX Home mobile app and the central monitoring station of the security company. The photo will be sent only during an obvious alarm.

u-prox alarm system

This detector also has the “pet immune” function, which means that it is not sensitive to the movement of animals weighing up to 20 kg and up to 1 m high.

Simple installation, easy addition to the new generation U-PROX MPX security system hub, and an unrivaled communication range with the hub allow you to find a good location in your space.

Clear photo verification of the alarm has the highest quality specifications:

  • motion detection range up to 12 m
  • photo resolution: 640×480, 320×240, 240×176 pixels
  • infrared illumination up to 8 meters for shooting in the dark and low light
  • photo transfer time up to 9 seconds.

It should also be noted that U-PROX PIR Cam uses intelligent algorithms to eliminate false alarms. This allows you to be sure that you receive notifications only in case of a real threat.

Choose the new U-PROX PIR Cam with photo verification, because clarity adds peace of mind and comfort to life!

Questions and answers

Filter
  • Most of the sensors are powered by lithium batteries. They have sufficient capacity and operating temperature range.

    Thanks to the adaptive power of the radio transmitters and the optimized data transmission protocol, the service life can be up to 7 years. The shortest service life of alkaline batteries “finger” or AAA, which are installed in the keyboard – up to 2 years.

    But the replacement does not even require a screwdriver, the keyboard is removed using a regular plastic discount or bank card.

  • Everything that is in U-PROX, from the idea to the engineering implementation is done exclusively in Ukraine.

  • 15 years ago massively used wired phones, mobile phones were either business or luxury. Now almost everyone has mobile phones. It’s not only comfortable. The quality of wireless communication is steadily increasing.

    The same situation with security systems. Wired systems require high-quality cable, trained personnel with electrical education, quality installation with line inspection, construction work with drilling, wiring, and other inconveniences. All this requires a lot of time.

    As a result, we have a total cost which includes work. And compared with wireless systems, it is much higher. The wireless security system can be installed independently, the kit includes everything you need for installation.

    The U-PROX security system has U-PROX BAND radio communication technology. It has unsurpassed characteristics in range, resistance to interference, due to channel redundancy, and is very efficient in terms of energy consumption.

  • It is reliable communication that distinguishes the U-PROX security system from its competitors. We use DSTU GOST28147-89 encryption with reverse gamma, 256-bit key (3DES level).
    Any of our radio devices operates in the notification (notification) mode, not polling, that is, as soon as an event occurs, it is immediately transmitted to U-PROX. In turn, the security center confirms the reception of the data packet by sending a response. The communication is two-way, imitation-resistant: the packet contains the detector serial number and the packet sequence number, which makes it impossible to replace the detector or send the same data packet by an intruder.

    The detector periodically sends data about its status to U-PROX, notifying that it is “alive”. We call this a “heartbit”. In response, it receives confirmation and additional commands.

    If the detector is installed in a place with poor conditions, it is used:

    • increasing the radio communication power – 3 gradations of the transmitting device power are available,
    • switching the data rate to improve the sensitivity of the receiving path,
    • switching to other (backup) channels in the frequency range of 868.0 … 868.6 MHz.

    In turn, the basic U-PROX device has 2 transceivers that work simultaneously to receive signals on different channels and speeds. And of course, there is a definition of radio jamming.

  • Your device communicates with the security company via two GPRS/LTE channels and the Internet – Wi-Fi or Ethernet.

    If you try to “jam” or somehow block the communication channel, U-PROX will send a signal about it.

  • Yes, if the security system uses the U-PROX PIR Cam detector with photo fixation.

    Thanks to it, users of the U-PROX Home mobile application can receive a photo from the detector at any time by pressing one button.

    Also, when a photo is received on request, it is possible to save it to the user’s smartphone photo gallery and enlarge it if necessary.

    The owner of the security system can also configure permissions to send photos in case of alarm to security companies.

  • Wi-Fi is a wireless technology for connecting devices to the wired Internet.

    It is implemented in the all security centers (hubs).

    The central unit in this case can be placed anywhere.

    1. We believe that this is our future – in 2-3 years, wireless equipment will occupy a large part of the security systems market. Almost everything will be wireless, and prices for such solutions will decrease.
    2. Wireless solutions are fast, convenient, and reliable.
    3. Вo not spoil the interior design and renovation during installation, as require a minimum of installation work.
    4. Minimize the time spent on installing the security system.
    5. U-PROX WDC, U-PROX Wireport, U-PROX Multiplexer  and U-PROX Siren have wired inputs to which wired devices can also be connected.
  • The use of mobile applications U-PROX Home and U-PROX Installer allowed to separate system settings and management.

    The U-PROX Home application is used to control the U-PROX security system. The application implements the required set of functions:

    • Arming.
    • Disarming.
    • Arming in night mode.
    • Alarm button.
    • Event history with simple filters.
    • View temperature from sensors.
    • Add camcorders with zones.
    • Watch the video from a connected camera.
    • In the event of any failure in the system application, U-PROX brings this information to the home screen, and notify the user via Push message.

    U-PROX Installer is used to configure the security system. Through an application is performed the primary activation of the sensors

  • The security group is a logically independent unit in the security system.

    It combines a group of sensors, which is placed and removed from protection separately and independently of others.

    This can be done by a user who is authorized to manage a specific group.

  • This is a function that can work in any of the security groups.

    It is implemented as follows. Consider the example of the house. When people put guards in this mode, the sensors that protect the perimeter: doors, windows, or even the entire first floor – become active. Other sensors – indoors – inactive. So, you can move freely inside the room, and intrusion from the outside will be detected.

  • The sensors are powered by their own batteries.

    And the U-PROX security center is equipped with a lithium-ion battery, which will provide autonomous power for 24 hours.

    And if this is not enough, then you can use the design feature of U-PROX devices – an input power supply 12V DC, which means that an external uninterruptible power supply can be used, or a car battery, then the autonomous life can be increased, even up to several weeks.

  • It is very easy to install the U-PROX security system. Everything you need for installation: screws, fasteners, come complete with each sensor. The devices have simple mounts. Installation of the sensors to the required space can be done using screws or using two-way tape.

    The overall security system installation will take about 10-15 minutes.It is very easy to install the U-PROX security system.

    Everything you need for installation: screws, fasteners, come complete with each sensor. The devices have simple mounts.

    Installation of the sensors to the required space can be done using screws or using two-way tape.

    The overall security system installation will take about 10-15 minutes.

    1. Modern energy-saving technologies allow you to not think about replacing batteries for several years (2-7 years).
    2. 2 weeks before the full discharge, the security system will warn you and the service security organization about the discharge.
    3. Popular battery sizes are used ААА, CR2, CR123A і CR2032.
  • This is implemented using cloud technology.

    With the security panel, the system works directly, “without intermediaries”.

    With the user’s smartphone, the mediator is the cell of the device in the cloud, through which events are displayed on the smartphone and control commands from the user are passed.

  • Modern systems work via an Internet connection, this is mobile Internet in LTE networks or fixed cable.

    U-PROX uses both connections, thus providing data transmission redundancy to the monitoring station in case of blocking or jamming of GSM-communication or cable breakage.

    Control of communication with the device is provided by the monitoring panel.

  • You can prevent water leaks in your apartment or house thanks to automation devices from U-PROX. The flood prevention system warns you of an unwanted water leak in the U-PROX Home app and automatically shuts off the water supply in case of a pipe burst or a malfunction of the washing machine.

    The smart valve control and power supply device allows you to automatically shut off/open the water supply when arming/disarming the room.

    You can also create personalized schedules for arming/disarming/operating the relay/water valve.

  • We use a proprietary technology called “U-PROX BAND”, it operates in the 868.0-868.6 MHz frequency range allocated for such systems and transmitter powers allowed without licensing up to 25 MW in the basic device, up to 20 mW in detectors, 10 mW in key fobs, with dynamic adjustment (the first exchange attempt is always at minimum power).

    U-PROX BAND has significant advantages over its competitors: the length of the packets transmitted over the air is almost two times less, the optimized retry algorithm (this is energy consumption), the sensitivity of the detector receivers is higher (this is the range both in line of sight and in building conditions). The U-PROX security center has two transceivers operating at different frequencies in the permitted range, providing redundant data transmission from sensors.

    One of the “tricks” of U-PROX BAND is the function of updating the software of all elements over the air. If any shortcomings are corrected or the functionality of the device is added, then the owner and the security company do not need to worry about dismantling, sending for an update. The update will occur automatically after the automatic update of the basic device.

  • The U-PROX security system has a refined design.

    As standard, the case of devices is executed in white or black color.

    For WDC sensors, the white starter kit includes replaceable dark brown housings.

  • If the animal is no more than 25 kg, then we will install special sensors that do not react to such animals, it is not required to restrict pets in movement.

    If the animal is large, then we recommend allocating a space for it in the room, where sensors that react to movement will not be installed, there you can install a sensor that responds to glass breakage, or sensors for opening doors and windows.

  • You can install the U-PROX Security System even if you have no wired internet.

    Since the backup communication source is the LTE/GSM network (the mobile operator card is installed).

    But in this case, you lose one of the communication channels.

  • If the phone is out of network, the security system remote control and watch events will not work.

    But you can get an alarm notification if you set up a call from the device to the user’s phone. This mode is indispensable if the system operates autonomously, without remote monitoring.

    We advise you to entrust security only to specialized companies, which will monitor your facility 24/7 and respond in case of alarm notification.

    U-PROX is the best wireless device for remote protection.

Still have questions?
Still have questions? Can't find the answer you're looking for?