U-PROX PIR
Outdoor V2

Outdoor wireless motion detector

U-PROX PIR<br>Outdoor V2
Remote sensitivity setting
U-PROX PIR Outdoor V2
Intelligent motion detection and animal immunity
U-PROX PIR Outdoor V2
Over-the-Air (OTA) Automatic Update
U-PROX PIR Outdoor V2
Up to 5 years of battery life
U-PROX PIR Outdoor V2
Outdoor operation mode
U-PROX PIR Outdoor V2
Wide viewing angle of 900
U-PROX PIR Outdoor V2
Anti-sabotage function
U-PROX PIR Outdoor V2

The fastest way to control

Gallery

Photos and videos

Certificates

Meet the new product!

Flexible system management, instant notifications and key features help take your safety and comfort to the next level

Want to buy?

Contact partner companies to purchase or install security and automation devices.

Want to sell?

Become an official distributor, reseller or installer of U-PROX security and safety systems.

Характеристики

Working distances 3 ... 15 m
Detection angle 90°
PIR target detection speed 0.2 ... 5 m/s
Optical noise immunity not less than 6500 Lux
Pet immunity movement of animals weighing up to 20 kg
Mounting heights 0.9 ... 1.10 m
Power 3V, two CR123A lithium batteries,
included in the package
Service life of battery up to 5 years
Radio frequency ISM wireless interface with multiple channels:
ITU region 1: 868.0...868.6 MHz (EU, UA), 869.0...869.4 (MA), 100 kHz bandwidth, 20 mW max, distance - up to 4800m (in open space);
ITU region 3 (AU): 916.5...917 MHz, 100 kHz bandwidth, 20 mW max, distance to devices - up to 4800 m (in open space).
Communication Two-way, encrypted, with sabotage (jamming) detection.
The encryption key is 256 bits
Operating temperature range -20°C ... +55°C
Permissible humidity up to 95%
Environmental class III (according to EN 50131-1)
Security grade 2
Dimensions no hood 180 x 70 x 62.5 mm
Dimensions with a hood 183.8 x 77.2 x 88.6 mm
Case colour white
Weight 0,29 kg
Protection class IP55
Complete set 1. U-Prox PIR Outdoor V2;
2. Two CR123A batteries (pre-installed);
3. Protective hood;
4. Mounting kit;
5. Short user manual
Color
U-PROX PIR Outdoor V2 - White
U-PROX PIR Outdoor V2 - White
U-PROX PIR Outdoor V2 - White
U-PROX PIR Outdoor V2 - White
U-PROX PIR Outdoor V2 - White

U-PROX PIR Outdoor V2 User manual

U‑PROX PIR Cam User Manual

Wireless Motion Sensor with Built‑in Camera (Pet‑Insensitive)

Table of Contents

  • Introduction
  • Safety Warnings
  • Applications for Customization
  • Description and Principle of Operation
  • Functional Elements of the Device
  • Technical Specifications
  • Installation Instructions
    • 7.1 Selecting the Installation Location
    • 7.2 Mounting Procedures
  • Operation and Settings
    • 8.1 Device Registration
    • 8.2 Alarm and Signal Testing
    • 8.3 Configuring Settings
  • Maintenance and Service
  • Compliance and Warranty
  • Scope of Delivery

1. Introduction

U‑Prox PIR Cam is a combined digital passive infrared radio channel sensor equipped with a PIR sensor and a camera. It is designed to protect enclosed residential and industrial premises by detecting changes in the thermal balance of the environment and, upon an intrusion, sending a photo to the U‑Prox alarm center.

The sensor is fitted with a special lens and is intended for use in rooms where pets (such as cats and dogs) may be present. The device is insensitive to the movement of animals weighing up to 20 kg.

It is installed indoors.

The sensor works exclusively with the U‑Prox security system; connection to third‑party systems is not supported.

Technical support is provided by phone: +38(091)481‑01‑69 and via email:

support@u-prox.systems

2. Safety Warnings

WARNING. THE DEVICE HAS A BUILT‑IN BATTERY. SUBSTITUTING THE BATTERY WITH AN INCORRECT TYPE MAY RESULT IN FIRE OR EXPLOSION. DISPOSE OF USED BATTERIES IN ACCORDANCE WITH LOCAL LAWS AND REGULATIONS.

3. Applications for Customization

U‑Prox Installer Mobile Application

An application for setting up the U‑Prox wireless security system. It is intended for both individual users and engineers of central monitoring stations. Using a mobile phone, the app allows you to perform full system setup – installation, testing, and calibration of wireless elements; configuration of security groups; connection to monitoring stations; and adding users with rights to control the security system via the U‑Prox Home app.

Installer Web Portal

The U‑Prox Installer WEB portal is designed for configuring the U‑Prox wireless security system. It is intended for both individual users and engineers of central monitoring organizations. Using a web browser, you can perform complete configuration of the security system – installation, testing, and calibration of wireless elements; configuration of security groups; connection to monitoring stations; and adding users with rights to control the system via the U‑Prox Home app.


https://web-security.u-prox.systems/

4. Description and Principle of Operation

U‑Prox PIR Cam User Manual – The U‑Prox PIR Cam is a combined digital passive infrared radio channel sensor equipped with a PIR sensor and a camera. It is designed to protect enclosed residential and industrial premises by detecting changes in the thermal balance of the environment and sending a photo to the U‑Prox alarm center upon an intrusion.

The sensor is fitted with a special lens and is intended for use in rooms where pets may be present. The device is insensitive to the movement of animals weighing up to 20 kg.

It is installed indoors.

The sensor works exclusively with the U‑Prox security system; connection to third‑party systems is not supported.

5. Functional Elements of the Device

  1. Sensor case
  2. Microphone hole
  3. Light indicator of operating modes
  4. PIR element lens
  5. Mounting bracket for the sensor
  6. Tamper contact
  7. Rear cover of the case
  8. Power button

6. Technical Specifications

Power Supply: 3V, powered by a CR123A lithium battery (pre‑installed); battery life up to 5 years.

Wireless Communication:

  • ISM‑band interface with multiple channels, featuring secure two‑way communication with 256‑bit encryption and sabotage detection.
  • ITU Region 1 (EU, UA): 868.0 to 868.6 MHz, 100 kHz bandwidth, 20 mW max, up to 4800 m (line‑of‑sight).
  • ITU Region 3 (AU): 916.5 to 917 MHz, 100 kHz bandwidth, 20 mW max, up to 4800 m (line‑of‑sight).

Operating Temperature: –20°C to +55°C

Dimensions:

  • Without Hood: 183.8 x 77.2 x 88.6 mm
  • With Hood: 180 x 70 x 62.5 mm

Weight: 290 grams

Motion Detection:

  • Working Distance: 3 to 15 m
  • PIR Target Detection Speed: 0.2 to 5 m/s
  • Mounting Height: 0.9 to 1.10 m
  • Detection Angle: 90°
  • Optical Noise Immunity: 6500 Lux

Environmental Conditions:

  • Pet Immunity: Up to 20 kg
  • Permissible Humidity: Up to 95%
  • Environmental Class: III (according to EN 50131‑1)
  • Security Grade: 2
  • Protection Class: IP55

7. Installation Instructions

7.1 Selecting the Installation Location

Choose a location that is free from direct sunlight, heavy dust, or moisture. Ensure optimal signal transmission by avoiding obstacles and areas with high radio interference. Verify the mounting height (between 0.9 and 1.10 m is recommended) and ensure the sensor’s field of view covers the desired area.

Note: For outdoor calibration, ensure there are no obstacles or direct sunlight during the range test.

7.2 Mounting Procedures

With Hood:

  • Prepare the Surface: Ensure the installation surface is clean, stable, and free from excessive moisture.
  • Mount the Device: Attach the device using the provided mounting bracket and bracket connector. Secure the device with the fixing screw and ensure the tamper switch plate is properly aligned.
  • Adjust the Detection Range: Use the motion detection range adjuster to fine‑tune the sensor’s working distance based on the installation environment.
  • Connect to the Control Panel: Once mounted, register the sensor with the U‑PROX control panel using the U‑PROX Installer mobile application.

Without Hood:

  • Follow similar mounting steps as above; note that the dimensions will differ slightly.

7.3 Connecting External Components

If additional external components (such as an LED for visual arm/disarm confirmation) are required, connect them to the dedicated contacts as follows:

  • LD Contact: + LED (red)
  • GND Contact: Ground (blue)
  • DC Contact: Sensor (yellow)

8. Operation and Settings

8.1 Device Registration

Launch the U‑PROX Installer Mobile App or Web Portal and sign in with your installer credentials.

  • Register the Device: Follow the step‑by‑step instructions on the app. Bring the sensor within approximately 1 meter of the control panel during registration for optimal connectivity.

8.2 Alarm and Signal Testing

Indicator Feedback: The sensor’s LED indicator will display the operating mode. During a range test, the LED will signal:

  • Green: Excellent signal quality (up to –87 dBm)
  • Yellow: Average signal quality (–88 to –94 dBm)
  • Red: Poor signal quality (–95 to –111 dBm)

Calibration: Conduct an anti‑masking calibration ensuring that no obstacles or direct sunlight interfere. Follow the app’s prompts for calibration timing (typically 10–30 seconds).

Alarm Notification: When motion or glass breakage is detected, the sensor processes the signal and sends an encrypted alarm to the U‑PROX control panel.

8.3 Configuring Settings

  • Light Indication: Toggle the LED indicator on/off according to your requirements.
  • Group Assignment: Assign the sensor to the appropriate security group (e.g., “Front Door” or “Living Room Window”) to enable integrated system monitoring.
  • Additional Settings: Further settings may be configured via the U‑PROX Installer app or web portal to customize behavior, such as alarm delays and response to tampering.

9. Maintenance and Service

Cleaning:

Wipe the sensor periodically with a soft, dry cloth to remove dust and debris.

Battery Replacement:

If the battery’s service life ends (up to 5 years), replace the CR123A battery only with the approved type. Follow manufacturer guidelines and dispose of used batteries in compliance with local regulations.

Troubleshooting:

If the sensor fails to communicate, check for physical obstructions, verify the installation, and consult the diagnostics available in the U‑PROX Installer app.

10. Compliance and Warranty

Standards Compliance:

The U‑PROX PIR Outdoor V2 complies with the Radio Equipment Directive 2014/53/EU and Directive 2011/65/EU (RoHS). The original Declaration of Conformity is available on the U‑PROX website in the Certificates section.

Warranty:

Warranty for U‑PROX devices (excluding batteries) is valid for two years from the purchase date. For any issues, please contact

support@u‑prox.systems

; remote troubleshooting may be available.

11. Scope of Delivery

The complete package includes:

  • U‑PROX PIR Outdoor V2 Device
  • Two CR123A Lithium Batteries (Pre‑installed)
  • Device Hood
  • Mounting Kit
  • Quick Start Guide

© 2024 Limited Liability Company Integrated Technical Vision
www.u-prox.systems

 

13 August 2024
U-PROX security system now with a camera
U-PROX security system now with a camera

Meet the new product that is already available for order - the U-PROX PIR CAM wireless motion detector.

If the detector is triggered, it will send one or a series of photos to assess the situation to the U-PROX Home mobile app and the central monitoring station of the security company. The photo will be sent only during an obvious alarm.

u-prox alarm system

This detector also has the “pet immune” function, which means that it is not sensitive to the movement of animals weighing up to 20 kg and up to 1 m high.

Simple installation, easy addition to the new generation U-PROX MPX security system hub, and an unrivaled communication range with the hub allow you to find a good location in your space.

Clear photo verification of the alarm has the highest quality specifications:

  • motion detection range up to 12 m
  • photo resolution: 640×480, 320×240, 240×176 pixels
  • infrared illumination up to 8 meters for shooting in the dark and low light
  • photo transfer time up to 9 seconds.

It should also be noted that U-PROX PIR Cam uses intelligent algorithms to eliminate false alarms. This allows you to be sure that you receive notifications only in case of a real threat.

Choose the new U-PROX PIR Cam with photo verification, because clarity adds peace of mind and comfort to life!

Questions and answers

Filter
  • Most of the sensors are powered by lithium batteries. They have sufficient capacity and operating temperature range.

    Thanks to the adaptive power of the radio transmitters and the optimized data transmission protocol, the service life can be up to 7 years. The shortest service life of alkaline batteries “finger” or AAA, which are installed in the keyboard – up to 2 years.

    But the replacement does not even require a screwdriver, the keyboard is removed using a regular plastic discount or bank card.

  • Everything that is in U-PROX, from the idea to the engineering implementation is done exclusively in Ukraine.

  • 15 years ago massively used wired phones, mobile phones were either business or luxury. Now almost everyone has mobile phones. It’s not only comfortable. The quality of wireless communication is steadily increasing.

    The same situation with security systems. Wired systems require high-quality cable, trained personnel with electrical education, quality installation with line inspection, construction work with drilling, wiring, and other inconveniences. All this requires a lot of time.

    As a result, we have a total cost which includes work. And compared with wireless systems, it is much higher. The wireless security system can be installed independently, the kit includes everything you need for installation.

    The U-PROX security system has U-PROX BAND radio communication technology. It has unsurpassed characteristics in range, resistance to interference, due to channel redundancy, and is very efficient in terms of energy consumption.

  • It is reliable communication that distinguishes the U-PROX security system from its competitors. We use DSTU GOST28147-89 encryption with reverse gamma, 256-bit key (3DES level).
    Any of our radio devices operates in the notification (notification) mode, not polling, that is, as soon as an event occurs, it is immediately transmitted to U-PROX. In turn, the security center confirms the reception of the data packet by sending a response. The communication is two-way, imitation-resistant: the packet contains the detector serial number and the packet sequence number, which makes it impossible to replace the detector or send the same data packet by an intruder.

    The detector periodically sends data about its status to U-PROX, notifying that it is “alive”. We call this a “heartbit”. In response, it receives confirmation and additional commands.

    If the detector is installed in a place with poor conditions, it is used:

    • increasing the radio communication power – 3 gradations of the transmitting device power are available,
    • switching the data rate to improve the sensitivity of the receiving path,
    • switching to other (backup) channels in the frequency range of 868.0 … 868.6 MHz.

    In turn, the basic U-PROX device has 2 transceivers that work simultaneously to receive signals on different channels and speeds. And of course, there is a definition of radio jamming.

  • Your device communicates with the security company via two GPRS/LTE channels and the Internet – Wi-Fi or Ethernet.

    If you try to “jam” or somehow block the communication channel, U-PROX will send a signal about it.

  • Yes, if the security system uses the U-PROX PIR Cam detector with photo fixation.

    Thanks to it, users of the U-PROX Home mobile application can receive a photo from the detector at any time by pressing one button.

    Also, when a photo is received on request, it is possible to save it to the user’s smartphone photo gallery and enlarge it if necessary.

    The owner of the security system can also configure permissions to send photos in case of alarm to security companies.

  • Wi-Fi is a wireless technology for connecting devices to the wired Internet.

    It is implemented in the all security centers (hubs).

    The central unit in this case can be placed anywhere.

    1. We believe that this is our future – in 2-3 years, wireless equipment will occupy a large part of the security systems market. Almost everything will be wireless, and prices for such solutions will decrease.
    2. Wireless solutions are fast, convenient, and reliable.
    3. Вo not spoil the interior design and renovation during installation, as require a minimum of installation work.
    4. Minimize the time spent on installing the security system.
    5. U-PROX WDC, U-PROX Wireport, U-PROX Multiplexer  and U-PROX Siren have wired inputs to which wired devices can also be connected.
  • The use of mobile applications U-PROX Home and U-PROX Installer allowed to separate system settings and management.

    The U-PROX Home application is used to control the U-PROX security system. The application implements the required set of functions:

    • Arming.
    • Disarming.
    • Arming in night mode.
    • Alarm button.
    • Event history with simple filters.
    • View temperature from sensors.
    • Add camcorders with zones.
    • Watch the video from a connected camera.
    • In the event of any failure in the system application, U-PROX brings this information to the home screen, and notify the user via Push message.

    U-PROX Installer is used to configure the security system. Through an application is performed the primary activation of the sensors

  • The security group is a logically independent unit in the security system.

    It combines a group of sensors, which is placed and removed from protection separately and independently of others.

    This can be done by a user who is authorized to manage a specific group.

  • This is a function that can work in any of the security groups.

    It is implemented as follows. Consider the example of the house. When people put guards in this mode, the sensors that protect the perimeter: doors, windows, or even the entire first floor – become active. Other sensors – indoors – inactive. So, you can move freely inside the room, and intrusion from the outside will be detected.

  • The sensors are powered by their own batteries.

    And the U-PROX security center is equipped with a lithium-ion battery, which will provide autonomous power for 24 hours.

    And if this is not enough, then you can use the design feature of U-PROX devices – an input power supply 12V DC, which means that an external uninterruptible power supply can be used, or a car battery, then the autonomous life can be increased, even up to several weeks.

  • It is very easy to install the U-PROX security system. Everything you need for installation: screws, fasteners, come complete with each sensor. The devices have simple mounts. Installation of the sensors to the required space can be done using screws or using two-way tape.

    The overall security system installation will take about 10-15 minutes.It is very easy to install the U-PROX security system.

    Everything you need for installation: screws, fasteners, come complete with each sensor. The devices have simple mounts.

    Installation of the sensors to the required space can be done using screws or using two-way tape.

    The overall security system installation will take about 10-15 minutes.

    1. Modern energy-saving technologies allow you to not think about replacing batteries for several years (2-7 years).
    2. 2 weeks before the full discharge, the security system will warn you and the service security organization about the discharge.
    3. Popular battery sizes are used ААА, CR2, CR123A і CR2032.
  • This is implemented using cloud technology.

    With the security panel, the system works directly, “without intermediaries”.

    With the user’s smartphone, the mediator is the cell of the device in the cloud, through which events are displayed on the smartphone and control commands from the user are passed.

  • Modern systems work via an Internet connection, this is mobile Internet in LTE networks or fixed cable.

    U-PROX uses both connections, thus providing data transmission redundancy to the monitoring station in case of blocking or jamming of GSM-communication or cable breakage.

    Control of communication with the device is provided by the monitoring panel.

  • We use a proprietary technology called “U-PROX BAND”, it operates in the 868.0-868.6 MHz frequency range allocated for such systems and transmitter powers allowed without licensing up to 25 MW in the basic device, up to 20 mW in detectors, 10 mW in key fobs, with dynamic adjustment (the first exchange attempt is always at minimum power).

    U-PROX BAND has significant advantages over its competitors: the length of the packets transmitted over the air is almost two times less, the optimized retry algorithm (this is energy consumption), the sensitivity of the detector receivers is higher (this is the range both in line of sight and in building conditions). The U-PROX security center has two transceivers operating at different frequencies in the permitted range, providing redundant data transmission from sensors.

    One of the “tricks” of U-PROX BAND is the function of updating the software of all elements over the air. If any shortcomings are corrected or the functionality of the device is added, then the owner and the security company do not need to worry about dismantling, sending for an update. The update will occur automatically after the automatic update of the basic device.

  • You can prevent water leaks in your apartment or house thanks to automation devices from U-PROX. The flood prevention system warns you of an unwanted water leak in the U-PROX Home app and automatically shuts off the water supply in case of a pipe burst or a malfunction of the washing machine.

    The smart valve control and power supply device allows you to automatically shut off/open the water supply when arming/disarming the room.

    You can also create personalized schedules for arming/disarming/operating the relay/water valve.

  • The U-PROX security system has a refined design.

    As standard, the case of devices is executed in white or black color.

    For WDC sensors, the white starter kit includes replaceable dark brown housings.

  • If the animal is no more than 25 kg, then we will install special sensors that do not react to such animals, it is not required to restrict pets in movement.

    If the animal is large, then we recommend allocating a space for it in the room, where sensors that react to movement will not be installed, there you can install a sensor that responds to glass breakage, or sensors for opening doors and windows.

  • You can install the U-PROX Security System even if you have no wired internet.

    Since the backup communication source is the LTE/GSM network (the mobile operator card is installed).

    But in this case, you lose one of the communication channels.

  • If the phone is out of network, the security system remote control and watch events will not work.

    But you can get an alarm notification if you set up a call from the device to the user’s phone. This mode is indispensable if the system operates autonomously, without remote monitoring.

    We advise you to entrust security only to specialized companies, which will monitor your facility 24/7 and respond in case of alarm notification.

    U-PROX is the best wireless device for remote protection.

Still have questions?
Still have questions? Can't find the answer you're looking for?