U-PROX SE steel
Anti-vandal SE series reader with OSDP
Wireless smoke detector
Photos and videos
Flexible system management, instant notifications and key features help take your safety and comfort to the next level
Contact partner companies to purchase or install security and automation devices.
Become an official distributor, reseller or installer of U-PROX security and safety systems.
Sensitivity range | 0.08 ... 0.12 dB/m (cotton smoke, air velocity 0.2 m/s) |
---|---|
Sound pressure level at 3 m | not less than 85 dB |
Power |
3V, two AAA (LR03) alkaline batteries included in the package |
Service life of battery | up to 3 years |
Radio frequency |
ISM wireless interface with multiple channels: ITU region 1: 868.0...868.6 MHz (EU, UA), 869.0...869.4 (MA), 100 kHz bandwidth, 20 mW max, distance - up to 4800m (in open space); ITU region 3 (AU): 916.5...917 MHz, 100 kHz bandwidth, 20 mW max, distance to devices - up to 4800 m (in open space). |
Communication |
Two-way, encrypted, with sabotage (jamming) detection. The encryption key is 256 bіт |
Operating temperature range | -10°C ... +55°C |
Permissible humidity | up to 75% |
Environmental class | II (according to EN 50131-1) |
Security grade | 2 |
Dimensions | Ø 80 х 47 mm |
Case colour | white |
Weight | 0.16 kg |
Complete set |
1. U-Prox Smoke; 2. Two LR03 AAA batteries; 3. Short user manual |
Wireless Optical Smoke Alarm for Residential & Industrial Premises
The U‑PROX Smoke is a wireless optical smoke alarm designed to provide early notification of smoke in residential or industrial premises. Although it does not prevent a fire, it significantly increases your potential escape time by alerting you to dangerous conditions. The device is an integral part of the U‑PROX security alarm system and is configured using the U‑PROX Installer mobile application.
For technical support, please contact:
Phone: +38(091)481‑01‑69
Email: support@u‑prox.systems
The U‑PROX Smoke is powered by two AAA (LR03) alkaline batteries. Replacing these batteries with an incorrect type may result in fire or explosion. Use only FR03 lithium or approved alkaline batteries (LR03) at temperatures above +5°C. Dispose of used batteries in accordance with local regulations.
Install the device only when the power supply is disconnected. Follow all electrical and fire safety guidelines during installation and maintenance.
Do not disassemble or modify the device. Adhere strictly to the manufacturer’s instructions to avoid safety hazards.
The U‑PROX Smoke integrates seamlessly into the U‑PROX security system. Configure and monitor its operation using:
U‑PROX Smoke is a wireless optical smoke detector that monitors for the presence of smoke using an optical sensor. Upon detecting smoke, the device sends a secure, encrypted alarm notification to the U‑PROX control panel. While it cannot prevent a fire, the smoke alarm allows for timely reaction and potentially increases the escape time during emergencies.
|
Power Supply: 3V, powered by two AAA (LR03) alkaline batteries (included). Battery service life up to 3 years.
Wireless Communication:
Operating Temperature: –10°C to +55°C
Dimensions & Weight:
Optical Characteristics:
Environmental & Safety Ratings:
Location Requirements: Install the smoke alarm in a location that provides the best detection of smoke in case of fire.
Avoid:
Tip: Use the U‑PROX Installer app to verify that the chosen location meets optimal detection conditions.
Surface Preparation: Ensure that the installation surface is clean, flat, and free of dust.
Mount the Device: Secure the device case on the wall or ceiling using appropriate mounting hardware. The bottom plate should be properly installed.
Verification: Confirm that the tamper magnet is engaged and that the light indicator functions correctly once the device is installed.
Registration: Register the device with the U‑PROX control panel using the U‑PROX Installer mobile application.
Connecting Wired Equipment: Route the cables from the wired detectors through the terminal block. Ensure that the connections to ALM1, ALM2, and TMP are made according to your system design.
Power Supply Connection: Although the module operates on battery power, ensure that any external power supply (if applicable) meets the 3V, 50 mA specification.
Launch the U‑PROX Installer mobile app or web portal and log in with your installer credentials.
Communication Test: Use the U‑PROX Installer app to run a communication test. The light indicator will display signal quality.
Configuration: Adjust settings for the wired inputs and power output via the U‑PROX Installer application.
Regularly clean the device plate, antenna, and terminal block with a soft, dry cloth to prevent dust accumulation.
Replace the CR123A batteries only with approved models. Follow proper safety guidelines and dispose of used batteries according to local regulations.
If the module fails to communicate or power connected devices, recheck all wiring, verify battery condition, and consult the diagnostic features in the U‑PROX Installer app.
The U‑PROX Wireport complies with the Radio Equipment Directive 2014/53/EU and Directive 2011/65/EU (RoHS). The original Declaration of Conformity is available on the U‑PROX website in the Certificates section.
Warranty for U‑PROX devices (excluding batteries) is valid for two years from the purchase date. For any issues, please contact
support@u‑prox.systems; remote troubleshooting may be available.
The complete package includes:
© 2024 Limited Liability Company Integrated Technical Vision
www.u‑prox.systems
The totally redesigned app has a new five-tab layout that’s more personalized, better organized, and easier to use.
Technical documentation
Photos of the devices
Photos for online stores
Declaration of conformity
CE certificate
Declaration of compliance with RoHS
Security Grade certificate
Welcome to our FAQ page! We've compiled a list of commonly asked questions to provide you with quick and informative answers
Most of the sensors are powered by lithium batteries. They have sufficient capacity and operating temperature range.
Thanks to the adaptive power of the radio transmitters and the optimized data transmission protocol, the service life can be up to 7 years. The shortest service life of alkaline batteries “finger” or AAA, which are installed in the keyboard – up to 2 years.
But the replacement does not even require a screwdriver, the keyboard is removed using a regular plastic discount or bank card.
Everything that is in U-PROX, from the idea to the engineering implementation is done exclusively in Ukraine.
15 years ago massively used wired phones, mobile phones were either business or luxury. Now almost everyone has mobile phones. It’s not only comfortable. The quality of wireless communication is steadily increasing.
The same situation with security systems. Wired systems require high-quality cable, trained personnel with electrical education, quality installation with line inspection, construction work with drilling, wiring, and other inconveniences. All this requires a lot of time.
As a result, we have a total cost which includes work. And compared with wireless systems, it is much higher. The wireless security system can be installed independently, the kit includes everything you need for installation.
The U-PROX security system has U-PROX BAND radio communication technology. It has unsurpassed characteristics in range, resistance to interference, due to channel redundancy, and is very efficient in terms of energy consumption.
It is reliable communication that distinguishes the U-PROX security system from its competitors. We use DSTU GOST28147-89 encryption with reverse gamma, 256-bit key (3DES level).
Any of our radio devices operates in the notification (notification) mode, not polling, that is, as soon as an event occurs, it is immediately transmitted to U-PROX. In turn, the security center confirms the reception of the data packet by sending a response. The communication is two-way, imitation-resistant: the packet contains the detector serial number and the packet sequence number, which makes it impossible to replace the detector or send the same data packet by an intruder.
The detector periodically sends data about its status to U-PROX, notifying that it is “alive”. We call this a “heartbit”. In response, it receives confirmation and additional commands.
If the detector is installed in a place with poor conditions, it is used:
In turn, the basic U-PROX device has 2 transceivers that work simultaneously to receive signals on different channels and speeds. And of course, there is a definition of radio jamming.
Your device communicates with the security company via two GPRS/LTE channels and the Internet – Wi-Fi or Ethernet.
If you try to “jam” or somehow block the communication channel, U-PROX will send a signal about it.
Yes, if the security system uses the U-PROX PIR Cam detector with photo fixation.
Thanks to it, users of the U-PROX Home mobile application can receive a photo from the detector at any time by pressing one button.
Also, when a photo is received on request, it is possible to save it to the user’s smartphone photo gallery and enlarge it if necessary.
The owner of the security system can also configure permissions to send photos in case of alarm to security companies.
Wi-Fi is a wireless technology for connecting devices to the wired Internet.
It is implemented in the all security centers (hubs).
The central unit in this case can be placed anywhere.
The use of mobile applications U-PROX Home and U-PROX Installer allowed to separate system settings and management.
The U-PROX Home application is used to control the U-PROX security system. The application implements the required set of functions:
U-PROX Installer is used to configure the security system. Through an application is performed the primary activation of the sensors
The security group is a logically independent unit in the security system.
It combines a group of sensors, which is placed and removed from protection separately and independently of others.
This can be done by a user who is authorized to manage a specific group.
This is a function that can work in any of the security groups.
It is implemented as follows. Consider the example of the house. When people put guards in this mode, the sensors that protect the perimeter: doors, windows, or even the entire first floor – become active. Other sensors – indoors – inactive. So, you can move freely inside the room, and intrusion from the outside will be detected.
The sensors are powered by their own batteries.
And the U-PROX security center is equipped with a lithium-ion battery, which will provide autonomous power for 24 hours.
And if this is not enough, then you can use the design feature of U-PROX devices – an input power supply 12V DC, which means that an external uninterruptible power supply can be used, or a car battery, then the autonomous life can be increased, even up to several weeks.
It is very easy to install the U-PROX security system. Everything you need for installation: screws, fasteners, come complete with each sensor. The devices have simple mounts. Installation of the sensors to the required space can be done using screws or using two-way tape.
The overall security system installation will take about 10-15 minutes.It is very easy to install the U-PROX security system.
Everything you need for installation: screws, fasteners, come complete with each sensor. The devices have simple mounts.
Installation of the sensors to the required space can be done using screws or using two-way tape.
The overall security system installation will take about 10-15 minutes.
This is implemented using cloud technology.
With the security panel, the system works directly, “without intermediaries”.
With the user’s smartphone, the mediator is the cell of the device in the cloud, through which events are displayed on the smartphone and control commands from the user are passed.
Modern systems work via an Internet connection, this is mobile Internet in LTE networks or fixed cable.
U-PROX uses both connections, thus providing data transmission redundancy to the monitoring station in case of blocking or jamming of GSM-communication or cable breakage.
Control of communication with the device is provided by the monitoring panel.
You can prevent water leaks in your apartment or house thanks to automation devices from U-PROX. The flood prevention system warns you of an unwanted water leak in the U-PROX Home app and automatically shuts off the water supply in case of a pipe burst or a malfunction of the washing machine.
The smart valve control and power supply device allows you to automatically shut off/open the water supply when arming/disarming the room.
You can also create personalized schedules for arming/disarming/operating the relay/water valve.
We use a proprietary technology called “U-PROX BAND”, it operates in the 868.0-868.6 MHz frequency range allocated for such systems and transmitter powers allowed without licensing up to 25 MW in the basic device, up to 20 mW in detectors, 10 mW in key fobs, with dynamic adjustment (the first exchange attempt is always at minimum power).
U-PROX BAND has significant advantages over its competitors: the length of the packets transmitted over the air is almost two times less, the optimized retry algorithm (this is energy consumption), the sensitivity of the detector receivers is higher (this is the range both in line of sight and in building conditions). The U-PROX security center has two transceivers operating at different frequencies in the permitted range, providing redundant data transmission from sensors.
One of the “tricks” of U-PROX BAND is the function of updating the software of all elements over the air. If any shortcomings are corrected or the functionality of the device is added, then the owner and the security company do not need to worry about dismantling, sending for an update. The update will occur automatically after the automatic update of the basic device.
The U-PROX security system has a refined design.
As standard, the case of devices is executed in white or black color.
For WDC sensors, the white starter kit includes replaceable dark brown housings.
If the animal is no more than 25 kg, then we will install special sensors that do not react to such animals, it is not required to restrict pets in movement.
If the animal is large, then we recommend allocating a space for it in the room, where sensors that react to movement will not be installed, there you can install a sensor that responds to glass breakage, or sensors for opening doors and windows.
You can install the U-PROX Security System even if you have no wired internet.
Since the backup communication source is the LTE/GSM network (the mobile operator card is installed).
But in this case, you lose one of the communication channels.
If the phone is out of network, the security system remote control and watch events will not work.
But you can get an alarm notification if you set up a call from the device to the user’s phone. This mode is indispensable if the system operates autonomously, without remote monitoring.
We advise you to entrust security only to specialized companies, which will monitor your facility 24/7 and respond in case of alarm notification.
U-PROX is the best wireless device for remote protection.