England 
Українська 
U-PROX Tag
Contactless active identifier for identification of ACS users
in hands-free mode.
Ergonomic case
Hands-free mode
256 bit encryption
Distance - up to 12 m
Up to 1 year
Button for activation
Identification
Devices with mobile identification
Active ID
A small key fob, for ACS users authorization to get access to the premises in hands-free mode.
- Opening at a distance of up to 15 m via BLE
- Secure communication channel
Two modes of operation
Can operates in two modes:
- Hands-free mode and activation by button
- Activation by button only
Car identification
No longer need to get out of the car or use additional means of authorization, such as a license plate camera, to open the barrier
Set up from a smartphone
Setting up the reader to work with Tag
Mobile application for configuring readers to work with Tag:
- Enabling Tag support
- Modes of operation of mobile identification
- Activation distance
- Сonfiguration templates
Gallery
Photos and video materials
Certificates
NEW PRODUCTS
Want to buy?
Contact partner companies to purchase or install security and automation devices.
Want to sell?
Become an official distributor, reseller or installer of U-PROX security and safety systems.
TECHNICAL SPECIFICATIONS
| Code length | 8 bytes |
|---|---|
| Communication |
2.4 GHz, up to 12 m, secure two-way communication with a 256-bit key |
| Read range | up to 12 m (can be configured in readers) |
| Power | battery CR2032, 3V |
| Service life of battery | up to 1 year |
| Operating temperature range | from -10°C to +40°C |
| Dimensions | Ø 39 x 9 x 57 mm |
| Weight | 12 grams |
| Case colour | white |
| Case material | plastic ABS+PC |
| Complete set |
1. U-PROX Tag; 2. CR2032 battery (pre-installed); 3. Instruction |
Color
U-PROX Tag User manual
Description
Contactless active identifier for authorization of control system users access in “hands-free” mode. Built-in activation button available.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE USED BATTERIES ACCORDING TO THE NATIONAL REGULATIONS.
U-PROX TAG SUPPLIED IN “ONLY BUTTON” MODE.
Features
U-PROX Tag works only with U-PROX SL and U-PROX SE readers and serves to transmit the ID.
Functional parts of the device
- 1. Button
- 2. Case cover
- 3. Fastening strap
Operating modes
U-PROX Tag operates in two modes – button only and active ID and button.
Button only
In this mode U-PROX Tag transmits the ID to the reader only on pressing the button.
Active ID and button
In this mode, U-PROX Tag periodically, each 0.9 seconds, broadcasts short information about himself and readiness to interact with the reader.
After receiving such information, the reader calculates the distance to U-PROX Tag , and if it corresponds to the one configured in it, and if the reader has not yet interacted with this U-PROX Tag, data is exchanged between the reader and the tag. The reader transmits the ID code received from the U-Prox Tag to the control panel.
To interact with the reader again, the U-PROX Tag must leave the reader’s range, or stop reporting for more than 6 seconds.
Switching operating modes
- 1. Press and hold the button on the device until the red indication appears
- 2. 2. Briefly press the button on the device three times
- 3. The indicator will glow yellow if the device is in “Active ID and Button” mode
- 4. The indicator will glow green if the device is in “Button Only” mode
Using U-PROX Tag
Readers support active mobile U-IDs PROX Tag and U-PROX Auto Tag devices.
Interaction with readers in the “Door” mode on pressing button
Approach the reader at a distance of 0.5 – 1 m and press the button on the U-PROX Tag. Data will be exchanged between the reader and the tag, the reader will transmit the ID code from the U-PROX Tag to the control panel.
If the code satisfies the access rules, the control panel will allow passage (unlocks the lock, etc.).
Reader interaction in the “Barrier” mode on pressing the button
Approach the reader at a distance of 3 – 12 m (depending on the reader’s settings) and press the button on the U-PROX Tag. Data will be exchanged between the reader and the tag, the reader will transmit the ID code from the U-PROX Tag to the control panel.
If the code satisfies the access rules, the control panel will allow passage (unlocks the lock, etc.).
Hands-free with readers in mode “Door”
Approach the reader at a distance of 0.5 – 1 m, having the U-PROX Tag with you. Data will be exchanged between the reader and the tag, the reader will transmit the ID code from the U-PROX Tag to the control panel.
If the code satisfies the access rules, the control panel will allow passage (unlocks the lock, etc.).
Hands-free with readers in “Barrier” mode
Get closer to the reader at a distance of 3 – 12 m (depending from reader setup) while carrying the U-PROX Tag. Data will be exchanged between the reader and the tag, the reader will transmit the ID code from the U-PROX Tag to the control panel .
If the code satisfies the access rules, the control panel will allow passage (will open the barrier, etc.).
Registration in the control system access
Hold the U-PROX Tag to the desktop reader at a distance of 10 – 20 cm and press the button on the device. The code will be read and transmitted to the access control system for further registration.
Battery replacement
To replace the U-PROX Tag battery, you will need box cutter or another tool with the same thin blade.
- 1. 1. Insert the blade of the knife into the gap between the top and bottom cover from the side opposite to the strap. Slide the blade around carefully to open latches that hold the top and bottom of the U-Prox case
- 2. Slide the bottom cover towards the strap, and remove it
- 3. Replace the battery
To assemble the U-PROX Tag:
- 1. Secure the strap onto the pin on the top case cover
- 2. Place the board in line with the guides, with the battery upwards
- 3. Align the bottom case cover with the cut-out of the strap, with 1.5 mm offset.
- 4. Press on the strap cover and slide it down. Then gently push cover down and close the U-Prox Tag
Warranty
Warranty for U-PROX devices (except batteries) is valid for two years after the purchase date. If the device operates incorrectly, please contact support@u-prox.systems at first, maybe it can be solved remotely.
Loading
Quick start guide
Certifiacte of conformity RED
Declaration of conformity
Declaration of conformity RoHS
Lifestyle photos
Photo for online stores
FAQ
-
- Connect wires D0 (green) and D1 (white) with each other
- Apply power to the reader
- Connect to the reader with application U-Prox Config installed on smartphone.
- Select “Settings”
- Set a password
- Go back
- Press “Save Settings”
- Press “Disconnect”
-
The control panes is the “brain” of the system, which determines whether or not the owner of the identifier is allowed to enter the door.
It has a built-in memory that stores identifier codes with a list of access rights for each of them.
When a person presents (brings to the reader) an identifier, the code read from it is compared with the one stored in the database, on the basis of which a decision is made to open the door.
-
A reader is a device that reads the code (key) of the identifier and transmits it to the controller.
-
PACS — Physical Access Control System —an access control and management system is a set of hardware and software control and management tools.
The main goal is to restrict and register the entry-exit of objects in a given area through “points of passage”: doors, gates, etc.
The main task is to control access to a given territory (who to let in, at what time and to what territory), including also:
- restricting access to a given territory;
- identification of a person who has access to a given territory.
-
An identifier is the basic element of an access control system that stores a code.
Each client is assigned a specific key (code), which serves to determine the owner’s rights – identification.
A card, a key fob, a tag can perform the function of an identifier.
-
Areas of application have a wide range of ACS:
- company offices, business centers;
- banks;
- educational institutions (schools, technical schools, universities);
- industrial enterprises;
- protected areas;
- parking lots;
- places of passage of vehicles;
- private houses;
- residential complexes;
- cottages;
- hotels;
- public institutions (sports complexes, museums, metro, etc.)
-
Everything that is in U-PROX, from the idea to the engineering implementation is done exclusively in Ukraine.
-
You can buy U-Prox equipment from our partners.
-
Open formats JSON and SOAP (XML) allow interaction between different applications, exchange data with access control systems and create applications that complement and extend the standard functionality of the U-PROX Web system.
API capabilities:
- Secure data exchange over a computer network.
- WEB service – the opportunity to interact with any platform and programming environment for SOAP and JSON protocol.
- Implementation of the user interface using the API.
- The ability to integrate with other systems and applications implemented by third-party developers.
-
U-PROX WEB provides a full range of solutions for quick installation, configuration and daily use of IP ACS by enterprises of any size, from a small office to a large company with many branches.
U-PROX Web has a full-featured web interface with fine-tuning of all ACS capabilities and provides the ability to monitor events, configure equipment, manage personnel access, and generate reports.
