How to install and restore U-PROX software: step-by-step guide
How to install and restore U-PROX software: step-by-step guide
Share and save
The latest version of the Golden Gate software series 2.xxx:
Installation instructions: For version 2.207, the instructions are included on the installation disc/package and additionally in the “ForInstaller”directory (special installation notes).
Incompatibility: The software is not supported on Windows 10 and newer operating systems — its launch and stable operation are not guaranteed.
Download:
The latest version of 2.xxx is 2.207.0.4217 (version 2.207, build 4217)
Databases in Golden Gate are files located in the directory
“С:\Program Files\ITV\Golden Gate 2002\” or “С:\ITV\Golden Gate 2002\“
and have names
GGLite.mdf
GGLite_log.ldf
GGLite_01.mdf
GGLite_01_log.ldf
…
GGLite_ХХ.mdf
GGLite_ХХ_log.ldf
– and always an even number of them, and at least 4 files
– the backup of the program databases contains ALL information – personnel, cards, equipment, settings, events…
– and looks like:
GGLiteDB_yy_mm_dd_hh_mm_ss
GGLiteDB_yy_mm_dd_hh_mm_ss_add_01
…
GGLiteDB_yy_mm_dd_hh_mm_ss_add_ХХ
where GGLiteDB_yy_mm_dd_hh_mm_ss is the main database, and GGLiteDB_yy_mm_dd_hh_mm_ss_add_XX are the event logs — always at least 2 files in total.
– when restoring a copy of databases, only the main database is specified – GGLiteDB_yy_mm_dd_hh_mm_ss
Review:
If OS Windows XP – then standard installation.
If the OS is Windows 7/8, Windows Server 2003, Windows Server 2008/2012:
We recommend reviewing the “ForInstaller” directory in this package — for installation on Win 7 (Win 8), Win SRV 2003, Win SRV 2008 (Win SRV 2012).
You can use the SQL Server from the “Prerequisites” directory of the 3.xxx version installation disc, or download it from the Microsoft website — the link is provided in the instructions further below.
– Installation guide for Win 7 (Win 8), Win SRV 2003, Win SRV 2008 (Win SRV 2012) – “Inst_GG2002_for_Win….pdf” – follow ALL steps IV.1–9 in any case!!!
Additional information:
HASP dongle drivers – from the installation disk of version 3.xxx, or
open GGFixSQL.exe with administrator rights (Run as Administrator);
check only the “Add protection from incompatible versions” option, and leave the rest inactive;
click Fix, wait until the database update is complete, and then close the utility.
Run the GGFixDB utility from the program folder. Fix all errors found:
open GGFixDB.exe with administrator privileges;
please note that it can take up to 10 minutes to complete.
Run GGFixSQL again. Fix all errors except for “Duplicated Events” (it can take a long time to remove duplicates).
Launch Golden Gate. The first launch may take longer than usual.
Go to the menu “Action → Settings”, then open the “Event Log Parameters” tab;
Ensure that the option “Enable log size check” is enabled, and that the maximum size does not exceed 1600 MB. If it is set higher — reduce it to 1600 MB.
Restart the PC. Make sure that the servicesItvdbNotifier, ItvPacketManager, andGolden Gate Hardware Servicehave started automatically.
Setting up the operation of the NDC-B052 controller.
For software versions 2.xxx, if there is an NDC-B052 controller with an Ethernet interface on the network, its ID is specified as the name of a string parameter in the registry, and the controller’s IP address is used as the value:
32-bit system HKEY_LOCAL_MACHINE\SOFTWARE\ITV\Golden Gate\2.00\AcsEthDrv
64-bit system HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\ITV\Golden Gate\2.00\AcsEthDrv
Each entry in this key is a String Value, where the parameter name is the NDC-B052 controller ID, and the parameter value is its IP address. Для додаткових рекомендацій дивіться файл NDCB052_difference.pdf.
Our SE line readers and SL line readers with 30.xx firmware support MasterCard PayPass (Contactless), Visa PayWave, Google Wallet, and Apple Wallet.
If you enable the "Pay Card" mode in the Mifare...
To add a key fob for a user, you need to go to the U-Prox Installer app and select your control panel.
Select the user to whom the key fob will be linked
And click Add.
Then, fol...
Information about the software and devices is available on the website https://u-prox.systems
On the Downloads page, the page - https://u-prox.systems/software/programs-and-archive/
It supports...
To register your company, please send an email to support@u-prox.systems with the following information:
Company name
Country
Company type (Service / Monitoring / Monitoring &...
To access the reader settings, you need to connect to the reader using the U-Prox Config application and the previously created administrator password.
There you can go to the reader set...
The U-Prox device operates on 12V, so it can be powered by appropriate power banks, uninterruptible power supply systems, and charging stations. If necessary, the device can also be powered from a ca...
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut ...
To set the engineer password, you need to connect (twist) two reader contacts—Data0 (WD0) green and Data1 (WD1) white—while the power is off, and then turn on the reader.
Then bring your smart...
You can use our Knowledge Capture app to leverage your team’s collective expertise.
With the app, agents can:
Search the Help Center without leaving the ticket
Insert links to relevant Help...
This document outlines three possible configurations for implementing an interlock system using U-PROX equipment. These are basic schemes that can be either adapted to specific user requirements or u...