Україна 
Setting an engineer password on U-PROX readers
To set the engineer password, you need to connect (twist) two reader contacts—Data0 (WD0) green and Data1 (WD1) white—while the power is off, and then turn on the reader. Then bring your smart...
U-prox reader settings
Share and save
To access the reader settings, you need to connect to the reader using the U-Prox Config application and the previously created administrator password.
There you can go to the reader settings.
In the settings, you can change the engineer code to access the reader.
Identifier type
Output interface
Facility code
Mobile ID encryption (BLE)
Mifare profile
Advanced reader settings
Reader display settings
Passage point settings
OSDP settings
You may also like
Placing under protection in "stay" mode
To arm the U-prox alarm system, go to U-prox home and press the corresponding button at the bottom of the application. Please note that this will place all groups in which this action can be p...
Errors when adding a device
The most common reasons a device cannot be added to your account are: The device is already added/activated under another U-Prox account.In this case, you’ll need to identify the user who activat...
Recovering your account password
To recover your U-Prox Home account password, click the "Forgot your password?" button and enter the email address used to register your account. The same reset procedure applies to the ...
Fire unlocking – wires
Thanks to the presence of zones programmable as FREE PASSAGE and LOCKDOWN, the controller fully integrates into the fire-security alarm system. To work together with the fire alarm,...
How to reduce the size of .log/.ldf files and optimize the U‑PROX database
Unpack the utility shrink_db_all_modif.bat from the archive shrink_db_all_modif.zip into the database directory (C:\Program Files (x86)\A2SoftIn\UProxIP), and, as needed, run ...
U‑PROX: restoring the management window and resetting the desktop configuration
If the “Control Window” does not open: This is one of the main windows—it cannot be absent, unless the user’s software permissions are restricted (in which case the menu would be greyed ...
Resetting the Master Card of the USB Reader in U-PROX Desktop — Step by Step
Resetting the Master Cards of the U-PROX Desktop USB Reader is done via U-PROX technical support — please send a request to support@u-prox.systems. To submit your request, provide the following in...
Configuring relay response to air alarms U-PROX
The air raid siren sound can be received on outdoor and indoor sirens connected to SECURITY CENTERS (HUBs) https://security.u-prox.systems/ua/u-prox-hubs-ua/ https://security.u-prox.systems/u...
Removing a device
Launch the U-Prox Installer application or log in via the U-Prox Installer WEB portal. 2. Select a security center from the list 3. Select the device from the list, click th...
