Україна 
Key fob registration
To add a key fob for a user, you need to go to the U-Prox Installer app and select your control panel. Select the user to whom the key fob will be linked And click Add. Then, fol...
Setting an engineer password on U-PROX readers
Share and save
To set the engineer password, you need to connect (twist) two reader contacts—Data0 (WD0) green and Data1 (WD1) white—while the power is off, and then turn on the reader.
Then bring your smartphone with the U-Prox Config app running to the reader, perform a search, select the required reader, and press the “connect” button again:
Next, go to the reader settings by selecting “Settings” and then “Engineer Code” and set a password:
After that, go to the main menu and save the changes to the reader:
Also, – see the article “U-Prox readers (lines SL, SE, BLE) – programming of parameters.”
Programming is performed from the mobile application U-Prox Config, via the Bluetooth channel.
When connecting to the reader – on the smartphone you must have Bluetooth and GPS (geolocation) enabled, and grant the necessary permissions to the application.
You can download the U-Prox Config application from PlayMarket or AppStore, as well as via the specified QR code:
You may also like
Registration/reading of U-Prox TAG on USB reader U-Prox Desktop
USB зчитувач U-Prox Desktop підтримує читання активної bluetooth мітки U-Prox TAG та U-Prox AU-Prox TAG Reader Requirements and Firmware Updates Mod.1 (GID 00:32:00:…): requires reader firmware ≥...
Steps to resolve errors that occurred during the installation of U-PROX software
Installation Failure Notification Installation errors typically occur due to leftover data from a previous installation, most often caused by manual user actions. Specifically: The applic...
U-PROX WEB installer web portal
The U-Prox Installer WEB portal is designed for configuring the U-Prox wireless security system. It is intended for both individual users and engineers of central monitoring organizations. Usin...
Description and principle of operation of U-PROX PIR Cam
U-PROX PIR Cam is a combined digital, passive infrared, radio-channel detector equipped with a PIR sensor and a camera, designed to secure enclosed residential and industrial spaces. By detecting ...
U‑PROX + facial recognition terminals: step-by-step instructions
Two Wiegand devices can be connected in parallel to one reader input, for example: a multi-format reader of our production; a biometric terminal with a Wiegand output (Wiegand OUT). ...
Using the U-PROX Desktop USB reader to work with FortNet software
As “FortNet” integrated an older 2016-release modification of the U-Prox Desktop USB reader that used a COM-port speed of 2400 bps—and provided no support for our newer USB devices (which use 9600 bp...
U‑PROX: restoring the management window and resetting the desktop configuration
If the “Control Window” does not open: This is one of the main windows—it cannot be absent, unless the user’s software permissions are restricted (in which case the menu would be greyed ...
Please help, I have a question and I need an answer.
You can use our Knowledge Capture app to leverage your team’s collective expertise. With the app, agents can: Search the Help Center without leaving the ticket Insert links to relevant Help...
Registration of Mifare cards in U-Prox IP software in compatibility mode with Hikvision face recognition terminals (ISAPI)
This article covers the configuration of U-Prox SL (v.30.xx) and SE series readers operating within a unified ACS under U-Prox IP software, alongside Hikvision biometric terminals integrated via the ...
