Україна 
Fire unlocking – wires
Thanks to the presence of zones programmable as FREE PASSAGE and LOCKDOWN, the controller fully integrates into the fire-security alarm system. To work together with the fire alarm,...
Configuring relay response to air alarms U-PROX
Share and save
The air raid siren sound can be received on outdoor and indoor sirens connected to SECURITY CENTERS (HUBs) https://security.u-prox.systems/ua/u-prox-hubs-ua/
Internal https://security.u-prox.systems/ua/u-prox-siren-ua/
External https://security.u-prox.systems/ua/u-prox-siren-outdoor-ua/
Settings
To automate the air alarm, you can configure a low-current relay to open the locks.
– When an alarm signal is received, the control panel automatically sends a command to the relay and the door lock opens. When an alarm cancellation signal is received, the control panel sends a command to the relay and the door lock closes.
Relay operation settings
Check out the video review for details on how to set it up.
You may also like
Adding a PIR CAM device to the security system (registration)
Run the U-Prox Installer application or open the web portal in your browser and log in to the system. Select the U-Prox MPX device to which you want to add a wireless sensor from the ...
General description of Mifare card encryption
All new equipment that supports working via Bluetooth – is programmed from the mobile configurator, and the U-Prox Desktop USB reader can also be (programmed) via the COM port (from the COM-port cons...
How to use the keypad codes and PIN code in U-PROX controllers
In the U-PROX system, you can use the following as an identifier: physical cards of ASK/FSK/MIFARE (125 kHz / 13.56 MHz) types - Em-Marin, HID Proxcard II, MIFARE Classic / Ultralight / Plus / DE...
How to enable global Anti-passback in the U-PROX IP system
Here’s what Antipassback.pdf specifies for configuring anti-passback in U-PROX: Entry-perimeter enforcement:If a user has not passed through the defined entry perimeter, any subsequent ...
Registration of Mifare cards in U-Prox IP software in compatibility mode with Hikvision face recognition terminals (ISAPI)
This article covers the configuration of U-Prox SL (v.30.xx) and SE series readers operating within a unified ACS under U-Prox IP software, alongside Hikvision biometric terminals integrated via the ...
Registration/reading of U-Prox TAG on USB reader U-Prox Desktop
USB зчитувач U-Prox Desktop підтримує читання активної bluetooth мітки U-Prox TAG та U-Prox AU-Prox TAG Reader Requirements and Firmware Updates Mod.1 (GID 00:32:00:…): requires reader firmware ≥...
How to reduce the size of .log/.ldf files and optimize the U‑PROX database
Unpack the utility shrink_db_all_modif.bat from the archive shrink_db_all_modif.zip into the database directory (C:\Program Files (x86)\A2SoftIn\UProxIP), and, as needed, run ...
How to set up U-PROX SL, SE and BLE readers
Programming takes place from the U-PROX Config mobile application via Bluetooth. The U-PROX Config app can be downloaded from the PlayMarket or AppStore, or by entering the QR code: When co...
Knowledge base post 2
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut ...
