Україна 
How to enable global Anti-passback in the U-PROX IP system
Here’s what Antipassback.pdf specifies for configuring anti-passback in U-PROX: Entry-perimeter enforcement:If a user has not passed through the defined entry perimeter, any subsequent ...
Key fob registration
Share and save
To add a key fob for a user, you need to go to the U-Prox Installer app and select your control panel.
Select the user to whom the key fob will be linked
And click Add.
Then, following the instructions on the screen, add your key fob.
You may also like
Creating an Interlock Using U-PROX Equipment: Step-by-Step Guide
This document outlines three possible configurations for implementing an interlock system using U-PROX equipment. These are basic schemes that can be either adapted to specific user requirements or u...
Sensor registration procedure
In the app, go to the central settings and click on the "Plus" icon. Next, you need to turn on the sensor itself.Please note that the distance between the device and the sensor should not exce...
Fire unlocking – wires
Thanks to the presence of zones programmable as FREE PASSAGE and LOCKDOWN, the controller fully integrates into the fire-security alarm system. To work together with the fire alarm,...
U-RPOX PIR CAM maintenance
Maintenance The device typically requires minimal maintenance. Using a dry, electronics-safe cloth, periodically wipe the enclosure to remove dust and other contaminants as they appear. Rep...
How to Add a Mobile Identifier License in U-PROX Desktop
Free Mobile Identifier Licenses for U-PROX Desktop USB Reader (2nd Revision, GID 00:4E:FE:…) By default, 5 prepaid mobile identifier licenses are available per USB reader (U-PROX Desktop...
U-PROX ID mobile identifiers: using QR codes and more
General information The electronic key, also known as a mobile identifier, is the container of the U-PROX ID application, and it can be transferred to a reader of our production: via Bluetooth...
Basic settings for U-Prox PIR Cam
Select the device you want to configure from the list of devices. 1. "Name" - the name of the device 2. “Group” – select the security group to which the device belongs. A security g...
Adding a PIR CAM device to the security system (registration)
Run the U-Prox Installer application or open the web portal in your browser and log in to the system. Select the U-Prox MPX device to which you want to add a wireless sensor from the ...
Setting up Bas‑IP in U‑PROX: step by step
The U-PROX system supports integration with BasIP panels (models AV-07, AA-12, as well as other models from the AV, AA, and BA series) in current software versions. However, due to the fact that B...
