Description and principle of operation of U-PROX PIR Cam
Description and principle of operation of U-PROX PIR Cam
Share and save
U-PROX PIR Cam is a combined digital, passive infrared, radio-channel detector equipped with a PIR sensor and a camera, designed to secure enclosed residential and industrial spaces.
By detecting changes in the thermal balance of the environment, it signals intrusion into the protected area and sends a photo to the U-PROX monitoring center.
The detector features a specialized lens and is intended for indoor use in areas where pets (cats, dogs, etc.) may be present. It is insensitive to movement of animals weighing up to 20 kg.
Installed indoors only, the U-PROX PIR Cam works exclusively with the U-PROX security system; integration with third-party systems is not supported.
Functional elements of the device
Detector housing
Operating-mode LED indicator
PIR sensor lens
Camera lens
Camera LED flash
Mounting bracket
Tamper switch
Rear cover
Power ON/OFF switch
Features
Motion detector
Activation distance
12 m
Viewing angle
88°
Target speed
0.3 … 3 m/s
Optical noise immunity
no less than 6500 Lux
Insensitivity to animals
movement of animals weighing up to 20 kg
Camera
Working distance
daylight illumination – up to 12 m night (with flash) – up to 8 m
Resolution
Customizable: 640*480, 320*240, 160*120
Photo transfer time
up to 9 seconds (average quality)
Other
Power
3V, two CR123A lithium batteries included
Battery life
up to 3 years
Radio communication
ISM wireless interface with multiple channels
Radio communication parameters
ITU Region 1 (EU, UA): 868.0 – 868.6 MHz, 100 kHz bandwidth, max. 20 mW, range up to 4 800 m (line of sight) ITU Region 3 (AU): 916.5 – 917 MHz, 100 kHz bandwidth, max. 20 mW, range up to 4 800 m (line of sight)
Resetting the Master Cards of the U-PROX Desktop USB Reader is done via U-PROX technical support — please send a request to support@u-prox.systems.
To submit your request, provide the following in...
Here are some common issues that can occur when updating device firmware—though specific problems vary by device and software—and a few general recommendations:
Make sure you have a stable Intern...
Launch the U-Prox Installer application or log in via the U-Prox Installer WEB portal.
2. Select a security center from the list
3. Select the device from the list, click th...
U-PROX software (also known as U-PROX IP or U-PROX Web) has two user interfaces: a classic Windows interface and a web interface. It uses the MSSQL database and operates...
The U-Prox device operates on 12V, so it can be powered by appropriate power banks, uninterruptible power supply systems, and charging stations. If necessary, the device can also be powered from a ca...
Select the device you want to configure from the list of devices.
1. "Name" - the name of the device
2. “Group” – select the security group to which the device belongs. A security g...
To recover your U-Prox Home account password, click the "Forgot your password?" button and enter the email address used to register your account.
The same reset procedure applies to the ...
To add a key fob for a user, you need to go to the U-Prox Installer app and select your control panel.
Select the user to whom the key fob will be linked
And click Add.
Then, fol...
This article covers the configuration of U-Prox SL (v.30.xx) and SE series readers operating within a unified ACS under U-Prox IP software, alongside Hikvision biometric terminals integrated via the ...
Thanks to the presence of zones programmable as FREE PASSAGE and LOCKDOWN, the controller fully integrates into the fire-security alarm system.
To work together with the fire alarm,...