Україна 
Reading Mifare easily: templates in U-PROX
MIFARE identifiers can contain a 4-byte or 7-byte code, which is read differently by different systems or equipment manufacturers. Therefore, U-PROX readers offer several interpretation schemes for t...
Removing the hub from your account
Share and save
To remove the control panel from your account, you need to go to the U-PROX Installer application and click the “Delete” icon opposite the desired control panel.
Then confirm the deletion and, if necessary, clear the central settings.
You may also like
Remote Workstation Setup in U-PROX IP
If the following message appears on the remote client: Although everything is working correctly on the server, this indicates that the operating system user does not have sufficient access rig...
Knowledge base post 4
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut ...
Anti-passback in U‑PROX: local and global Anti‑passback settings
This document describes options for implementing antipassback in the U-PROX system. Функціонал антидублів (Anti-passback) у системі U-PROX працює лише для двосторонніх дверей.If one-way doors are ...
Basic settings for U-Prox PIR Cam
Select the device you want to configure from the list of devices. 1. "Name" - the name of the device 2. “Group” – select the security group to which the device belongs. A security g...
How to integrate turnstiles into the U-PROX IP system
Information about the software and devices is available on the website https://u-prox.systems On the Downloads page, the page - https://u-prox.systems/software/programs-and-archive/ It supports...
Steps to resolve errors that occurred during the installation of U-PROX software
Installation Failure Notification Installation errors typically occur due to leftover data from a previous installation, most often caused by manual user actions. Specifically: The applic...
Setting up Bas‑IP in U‑PROX: step by step
The U-PROX system supports integration with BasIP panels (models AV-07, AA-12, as well as other models from the AV, AA, and BA series) in current software versions. However, due to the fact that B...
Registration/reading of U-Prox TAG on USB reader U-Prox Desktop
USB зчитувач U-Prox Desktop підтримує читання активної bluetooth мітки U-Prox TAG та U-Prox AU-Prox TAG Reader Requirements and Firmware Updates Mod.1 (GID 00:32:00:…): requires reader firmware ≥...
Placing under protection in "stay" mode
To arm the U-prox alarm system, go to U-prox home and press the corresponding button at the bottom of the application. Please note that this will place all groups in which this action can be p...
