Україна 
General description of Mifare card encryption
All new equipment that supports working via Bluetooth – is programmed from the mobile configurator, and the U-Prox Desktop USB reader can also be (programmed) via the COM port (from the COM-port cons…
Knowledge base
This is a huge amount of knowledge, facts, rules and heuristics.
Please help, I have a question and I need an answer.
You can use our Knowledge Capture app to leverage your team’s collective expertise. With the app, agents can: Search the Help Center without leaving the ticket Insert links to relevant Help…
Adding a PIR CAM device to the security system (registration)
Run the U-Prox Installer application or open the web portal in your browser and log in to the system. Select the U-Prox MPX device to which you want to add a wireless sensor from the …
Adding an engineer or manager to a security company
The right to edit employees belongs to the company administrator or the corporate administrator (if one exists).To add an engineer to the security company, go to U-Prox Installer WEB and open the “Em…
Installation of U-PROX PIR CAM
Choice of installation location Carefully choose the installation location of the U-Prox PIR Cam device, taking into account the orientation of the lens, the camera, and the presence of obstacles …
Setting an engineer password on U-PROX readers
To set the engineer password, you need to connect (twist) two reader contacts—Data0 (WD0) green and Data1 (WD1) white—while the power is off, and then turn on the reader. Then bring your smart…
Recovering your account password
To recover your U-Prox Home account password, click the “Forgot your password?” button and enter the email address used to register your account. The same reset procedure applies to the …
Using the U-Prox Desktop USB reader as a “virtual keyboard”
Using the U-Prox Desktop USB reader as a “virtual keyboard” involves sending the read code to the cursor location in Windows. See below for the required settings. Two options are possible – “Bl…
Using the U-PROX Desktop USB reader to work with FortNet software
As “FortNet” integrated an older 2016-release modification of the U-Prox Desktop USB reader that used a COM-port speed of 2400 bps—and provided no support for our newer USB devices (which use 9600 bp…
Removing the hub from your account
To remove the control panel from your account, you need to go to the U-PROX Installer application and click the “Delete” icon opposite the desired control panel. Then confirm the deletion and,…
